New member about to get his feet wet

[T0rnado69]

if I am going to shell out the necessary to build a CNC table scrimping on the cutter is probably false economy

if you want to do it right and once.
then you don't want to scrimp on the drivers,motors or linear gear either.

but i agree you want the best cutter you can have.

[linskill]

Speaking of the control electrics, Not wanting to reinvent the wheel I was thinking of one the Bladerunner kits from candcnc. I am not sure about the THC - whats the difference between the DTHC IV and the DTHC II.