-
03-08-2015 #1
Hi,
I have just bought a 1997 Denford Triac VMC with toolchanger and Fanuc O-M control and a 2001 Cyclone with 21i control.
They will be delivered this week and I wondered if anyone has a data sheet or information on how much power they will draw.
This is the information from the plate on the machines...
Triac
Voltage 415V F.L.C 30A 50Hz 3Ph
Cyclone
Voltage 415V F.L.C 20A 50Hz 3Ph
I can have some three phase isolators added to the workshop but the electrician need some clarification before doing any wiring.
Just wondered if they will really draw that much power in normal working conditions.
Hope someone can help, many thanks in advance
JamesLast edited by jamesgates1000; 03-08-2015 at 07:32 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Renishaw Cyclone Series 2 For Sale
By Anthm in forum Probing, Digitizing & ScaningReplies: 6Last Post: 22-04-2015, 01:09 PM -
Fanuc w3 paramaters
By Ismirko in forum Machine DiscussionReplies: 3Last Post: 03-02-2015, 08:29 PM -
Cyclone extraction
By gorbo in forum Dust Extraction & CollectionReplies: 7Last Post: 17-04-2014, 05:36 PM -
Minimal-cost Power Supply Strategy - Repurpose Laptop Power Supplies
By LoveLearn in forum General ElectronicsReplies: 0Last Post: 25-01-2012, 09:29 PM -
Fanuc, any one know this well, need pointers/help
By fastcarl in forum Machine Control SoftwareReplies: 2Last Post: 26-08-2011, 07:46 AM
Bookmarks