My Cnc build

[Skiprat]

Here we go. It all started with an idea of approx 2ft x 3 ft bed and i had a nice space in my shed to put it. I watched ebay and bought a few bits and pieces and then it went all wrong in a good way
My brothers factory was closing down and all the square tubing was FREE. and i also got two lengths of linear rail for cheap approx 2mtrs long followed by another two lengths off the same-ish length. so i had to build one to those dimensions...Honest
The motors and gear i had was no good for that particular size so off to Zappautomation and i bought the full set of closed loop stepper motors including THC.

Hopefully the following pictures will tell a thousand words and you also get deducted points for a tidy workshop, so i will not be expecting any deductions .

Cheers Tommy.

[routercnc]

Should there be some photos attached Tommy? Or are they on the way

[Skiprat]

Hello
Hopefully tomorrow night as i now know thread is live and i will have to do some reading into image sizes etc.
Cheers Tommy

[Skiprat]

Here we go...some materials sort from all corners of my contacts...pictures may come in various times...some before others could be completed so this will hopefully sort out the confusion..

[Skiprat]

They were then cut, bent, welded and painted...to suit my memory plan
~

[Skiprat]

Some more...
~

[Fatty]

They are on there way.just waited for my submission to be approved and need to do some reading about sizes etc...work tomorrow , so hopefully tomorrow night...
Cheers Tommy

[Fatty]

Just replied and my name comes up fatty...must of joined with that name and not Skiprat...need to sort that out aswell...

[Skiprat]

Hopefully tomorrow night as i now have had the thread approved if you know what i mean....and i need to sort out sizes of images etc...cheers Tommy

[Skiprat]

Ive cut the square tube and it needs drilling and painting but away at the moment and not back till sunday so probablies next week for an update.....once y axispart i should be able to make somw makeshift reduction parts to allow the machine to cut out its own "permanent" ones.

Cheers Tommy