Thread: My Cnc build
Threaded View
-
03-08-2015 #1
Here we go. It all started with an idea of approx 2ft x 3 ft bed and i had a nice space in my shed to put it. I watched ebay and bought a few bits and pieces and then it went all wrong in a good way
My brothers factory was closing down and all the square tubing was FREE. and i also got two lengths of linear rail for cheap approx 2mtrs long followed by another two lengths off the same-ish length. so i had to build one to those dimensions...Honest
The motors and gear i had was no good for that particular size so off to Zappautomation and i bought the full set of closed loop stepper motors including THC.
Hopefully the following pictures will tell a thousand words and you also get deducted points for a tidy workshop, so i will not be expecting any deductions .
Cheers Tommy.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks