My Cnc build

[njhussey]

......The holes were plugged with 6mm threaded inserts which will be used to hold down the material to be cut.

Machine is looking good! Don't try to tighten whatever you're clamping down too tight, the inserts pull out of the MDF really easily or distort the bed round them so it's no longer flat!!

[Skiprat]

Here is a picture of the real first job...

njhussey.....same thoughts as you but upto now the bolt holes held the piece no problems but that might be because its a new piece of mdf.
Not sure after a lot of spilt coffee etc....

Light not too good but its visible.



Cheers Tommy