Thread: My Cnc build
-
03-08-2015 #1
Here we go. It all started with an idea of approx 2ft x 3 ft bed and i had a nice space in my shed to put it. I watched ebay and bought a few bits and pieces and then it went all wrong in a good way
My brothers factory was closing down and all the square tubing was FREE. and i also got two lengths of linear rail for cheap approx 2mtrs long followed by another two lengths off the same-ish length. so i had to build one to those dimensions...Honest
The motors and gear i had was no good for that particular size so off to Zappautomation and i bought the full set of closed loop stepper motors including THC.
Hopefully the following pictures will tell a thousand words and you also get deducted points for a tidy workshop, so i will not be expecting any deductions .
Cheers Tommy.
-
03-08-2015 #2
Should there be some photos attached Tommy? Or are they on the way
-
03-08-2015 #3
They are on there way.just waited for my submission to be approved and need to do some reading about sizes etc...work tomorrow , so hopefully tomorrow night...
Cheers Tommy
-
03-08-2015 #4
Just replied and my name comes up fatty...must of joined with that name and not Skiprat...need to sort that out aswell...
-
04-08-2015 #5
Hopefully tomorrow night as i now have had the thread approved if you know what i mean....and i need to sort out sizes of images etc...cheers Tommy
-
04-08-2015 #6
Hello
Hopefully tomorrow night as i now know thread is live and i will have to do some reading into image sizes etc.
Cheers Tommy
-
04-08-2015 #7
Here we go...some materials sort from all corners of my contacts...pictures may come in various times...some before others could be completed so this will hopefully sort out the confusion..
-
04-08-2015 #8
They were then cut, bent, welded and painted...to suit my memory plan
~
-
04-08-2015 #9
Some more...
~
-
04-08-2015 #10
Some more with paint pre-fitment etc...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks