Thread: 8 x 4 build
-
18-08-2015 #11
Have you a read through this build log? Lots of renderings at the start and photos of the frame later on that might help.
http://www.mycncuk.com/threads/6619-...2060#post52060
-
18-08-2015 #12
-
18-08-2015 #13
hi clive, what do you mean have factored in the whip?
cheers
-
18-08-2015 #14..Clive
The more you know, The better you know, How little you know
-
19-08-2015 #15
i used rotating nuts, on my 8x4 build because of the whip effect Clive mentions.
skip to about 1:15
http://www.mycncuk.com/threads/8242-...t=wall+mountedLast edited by kingcreaky; 19-08-2015 at 07:55 AM.
-
20-08-2015 #16
thanks guys i will take a look :)
-
22-08-2015 #17
i want to hide my z axis stepper motor rather then having it stuck in the air so it requires a belt and pulley, is there a requirement to which i should aim for? more teeth the better or the opposite?
cheers
ashLast edited by reefy86; 22-08-2015 at 02:03 AM.
-
22-08-2015 #18
i recommend to brace the legs with the diagonals , not the way it is now, there is no force pushing on the braces on that orientation
:)
-
24-08-2015 #19
think this maybe my final design on the frame, what do you think?
cheers
ash
-
30-08-2015 #20
I would suggest you don't need the flat bar as it's not likely to add anything, where you've got the angled sections on the "feet/legs" of the frame, move those up into the rectangular spaces or add some there, they will serve you much better.
.Me.Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks