Okey! Update time.. decided on going with L style gantry using 80x40 aluprofiles.
The plan is to go vertical with the router.
Got all plates for z y and x axis machined in steel by a forumfriend. Turns out the gantry with plates, rails, bearings, motors and spindle will weigh in at about 60kgs. Sounds a bit much?
Will I be okey using cnc4you 4nm nema23 motors? 2 for the standing x axis and 1 each för y and z..? 80v digital drivers running on 68V psu I might add...