Thread: 3 motor mounts needed,
-
26-08-2015 #1
anasonic minas a4 200w motors, 'I think 60mm bolt holes to squares
to an isel fb2
motors foot is 6-7mm
any suggestions ??
I am in London
I have some 15mm aluminium plate
would like them sexied up if possible on the lower plate, maybe cove bit what ever that's called and knock the edges off
oops, just ordered the motor couplings 11mm to 1/4 and could only get them 42mm long
so the lower plate needs to be 20mm - I have some of that too.
I can't slow my motor down enough - don't know what bit to use.
don't know depth per pass
don't know the grade of allominoominoom I have
can't sexy them up with cove and 45 knocks
take 3
just two 20mm plates now, found some smaller couplers
Last edited by nobby; 31-08-2015 at 04:13 PM.
-
28-05-2017 #2
ok so...
basically motor mounts to take a 200w Panasonic minas a4 motor onto a isel techno fb2
or a davinci
prices please
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Ballnut Mounts needed.
By dudz in forum Projects, Jobs & RequestsReplies: 1Last Post: 05-03-2014, 09:01 AM -
FOR SALE: 2x 2005 C7 Ballscrew 1450mm Length with Ballnuts + FK/FF mounts and motor coupler
By Shinobiwan in forum Items For SaleReplies: 38Last Post: 31-12-2012, 02:42 PM -
RFQ: Nema 23 motor mounts
By luke11cnc in forum Projects, Jobs & RequestsReplies: 14Last Post: 06-10-2011, 02:21 PM -
FOR SALE: MDF NEMA 23 Motor mounts
By Tom in forum Items For SaleReplies: 40Last Post: 21-08-2010, 01:23 AM -
DIY Nema23 Motor Mounts
By Lee Roberts in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 23-08-2009, 06:08 PM
Bookmarks