-
30-08-2015 #1
Hi guys,
I need to hire a wood-working shop for a day or two. I've found one in Battersea which looks good but is quite a long way from me in Gravesend, Kent. Can anyone suggest an alternative?
The job I need to do is pretty simple; just rip some sheets of ply, add a plain rebate to each side then cross cut them. So I need a table saw and a router table / spindle moulder.
Any ideas, or do you have a workshop that is not fully utilised?
Regards,
SimonLast edited by Tenson; 30-08-2015 at 08:41 PM.
-
30-08-2015 #2
Men's Sheds are a great Aussie idea....... partly to make up for being so submissive at cricket ;)
Looks as if there are now Men's Sheds already open in Dartford and Gillingham.
-
30-08-2015 #3
1. just rip some sheets of ply.
2. add a plain rebate to each side.
3. then cross cut them.
cant you use a circ saw ? run against a straight edge.
you could use a router to add the rebate.
depends how wide the pieces are... you could cross cut them with a chop saw.
or a radial arm saw.
-
31-08-2015 #4
-
31-08-2015 #5
Thanks. It's not the tools that are the issue it's the space to work and make some mess. I used to have a table saw but sold it when I moved due to the space.
-
31-08-2015 #6
fair play, i do what i can in my garage, and what i cant outside it. ( weather permitting )
Last edited by T0rnado69; 31-08-2015 at 01:12 AM.
-
31-08-2015 #7
Bugger, I forgot to give you the weblink which is http://menssheds.org.uk/find-a-shed/
.
Looks like the Gravesend Shed is yet to come, but there are already Men's Sheds already open in Dartford and Gillingham.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Recommendation for getting MDF worked on in North London?
By surv1v0r in forum General DiscussionReplies: 0Last Post: 10-09-2014, 12:09 AM -
Spindle Motor Recommendation.
By cambesol in forum Marketplace DiscussionReplies: 0Last Post: 21-11-2013, 12:15 PM -
Router recommendation for University
By S2L in forum Marketplace DiscussionReplies: 12Last Post: 05-12-2012, 11:58 AM -
Router bit recommendation, spindle speed and feed rate?
By FlightCaseCo in forum Spindles & Drive MotorsReplies: 13Last Post: 03-04-2012, 12:53 PM -
NEW MEMBER: Have woodwork, looking for a router owner who may be interested
By Lance in forum New Member IntroductionsReplies: 2Last Post: 08-06-2011, 01:28 PM
Bookmarks