T-Slot bed for my machine (cost effective)

[phill05]

http://www.ebay.de/itm/Aluminium-T-s...-/171901743199

[Boyan Silyavski]

I did some comparison price wise , plus i designed some cheaper and sturdier solutions, look post #165

Personally i finished using only UPN140 profiles, no spaces, and a lot of threaded fixing holes, and honestly next time i make a machine for sb. i will possibly directly integrate them in the structure

Here/ welding & fabrication bech project/ you could see how i fixed them to the table. Holes as big as the bolt head and nut one size larger than bolt, soldered at the bottom side. All fixing holes are tapped using my Makita drill driver at 12-16 so i would not break the bit. Good threading fluid is essential. Every 500 holes change tap. That for people with big machines, like mine.

As you can check the comparison, that's the cheapest and possibly the strongest DIY table design ever .