Desktop size steel welded router 3 axis

[Tom J]

Updated design - new colour, few minor changes in Z plate


Welding the gantry - was waiting for another precision angle from Amazon - Happy with the result 0.5 mm off i checked against one side - spot on from other side. When all will be welded together (base for rails, ribs, etc) than will machine the base to have straight angle. I will leave the rails on the block, as this will be reference surface to the angle plate when fix to the mill - confusing now, but will show the picture soon.
Meantime - how I achieved accuracy before welding - spot how I use the straight angles (Gantry legs, than against table and Base for X axle) All surfaces has been planed each time I weld something - this was my error, should weld everything first than machine to avoid distortion.