-
13-06-2009 #1
Might be just what you are looking for, 3 metres of rack & 3 pinions + shaft& bearings
Jeff.Nothing is foolproof......to a sufficiently talented fool!
-
14-06-2009 #2
Can you get away with a courser rack ?
Reason I ask is we used to buy 2 mod, that's about 12 DP rack 25 x 25 or thereabouts in 1 metre lengths for £35 a length from Italy.
May still be some brand new lengths kicking about. Pinions would have been 15 and 30 or 20 and 40 but probably got some of them somewhere.
Also converted a loading robot for GKN at Chesterfield that loaded cylinder liners into boring machines, took 1.5 meter racks off and replaced them with 3 metres ones, the old 1.5's may still be kicking about, again probably 2 mod.
.John S -
-
14-06-2009 #3
I thought it was a steal :heehee:
I paid 183 sovs plus the dreaded and delivery from MD for 3m of rack and 2 pinions.
You'r getting 3m of rack, 3 (count e'm 3!!!) pinions a machined shaft and the bearings to go with them. I give up! Stingy Yorkshire gits, worse than the Scots you lot!!
That's a wink by the way as Lee STILL has not seen fit to supply a quality , animated wink.
Jeff.Nothing is foolproof......to a sufficiently talented fool!
-
14-06-2009 #4
-
14-06-2009 #5
Thanks for the offer but as usual by the time you add shipping on, it's overall cheaper to pick the phone up and get a local delivery.
I have started setting my Ebay searches now for 10 miles of my post code, surprising what's local and can be picked up one night and call in a pub for a meal.
Got a flat screen monitor keyboard and mouse for £16 the other night and the guy delivered it so missed out on me steak, bastich.John S -
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rack & Pinion Gearbox/Gearing
By andrewbond in forum Rack & Pinion SystemsReplies: 21Last Post: 12-09-2015, 09:10 AM -
BUILD LOG: 10ft x 5ft Rack & Pinion, BIG BUILD
By andrewbond in forum DIY Router Build LogsReplies: 3Last Post: 03-03-2014, 09:20 PM -
z axis rack and pinion advice
By marbles in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 09-01-2013, 11:41 PM -
Rack and Pinion MOD 1 & MOD 2 diffrence
By D-man in forum Rack & Pinion SystemsReplies: 2Last Post: 07-11-2012, 03:29 PM -
Rack and Pinion
By pmcb1011 in forum Rack & Pinion SystemsReplies: 3Last Post: 31-05-2011, 11:55 AM
Bookmarks