BZT - A Poor Quality Machine

[fidia]

Will the firmware version affect the BTZ files etc?

[DuffelBuffelWuffel]

Firmware Is just for the device, the settings have influence on the control software (CNC 4.01 or whatever you are using).
The firmware version usually also has an accompanied new control software version. Depending on the changes there might be "new" variables added to the newly generated cnc.ini (will be in different install folder than your old cnc 4.xxx ).

[fidia]

Latest seems to be release 4.02 and firmware 1.11. Board type CPU5A.

[DuffelBuffelWuffel]

How I did it is to make screenshots of the settings of the old controller software and entered the values to the new control software manually.
Machine worked without issues.

[fidia]

On second thoughts I think I better not proceed as I could void the warranty as the machine is only 6 months old.

[DuffelBuffelWuffel]

I do not see how updating the firmware (as recommended by the maker Bert Eding) is voiding your warranty.
Also If you bought it as an business you probably have none warranty unless it is especially stated in the terms of sales / terms of service.

[fidia]

This machine was bought for a business. They have confirmed it has a warranty.