. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-10-2015 #3
    gabi68's Avatar
    Lives in Crawley, United Kingdom.
    gabi68
    Last Activity: 08-01-2022 Has been a member for 9-10 years. Has a total post count of 42.
    Hi Jazz,

    I did not wire the spindle, but I think if I put live to R/L1 and neutral to S/L2/N and earth to ground main side and UVW to spindle side I will be OK.
    Spindle is 24000 RPM, 400HZ, 220V, 8.5A, 3 phase.
    My problem lies on the parameter side. I read the manual and I am not to confident which parameter I need to change and with what.
    Can you help?

    Thank you
    Gabi
    Last edited by gabi68; 08-10-2015 at 11:12 PM. Reason: giving details
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Water cooled / air cooled 2.2kw spindle
    By suesi34e in forum Generic Chinese Spindles
    Replies: 15
    Last Post: 25-02-2015, 04:57 PM
  2. Drawing of water cooled spindle
    By GTJim in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 11-02-2014, 04:21 PM
  3. Do you need to water cool erhm a water cooled spindle?!!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 18
    Last Post: 02-10-2013, 09:59 PM
  4. Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 17
    Last Post: 18-09-2013, 06:32 AM
  5. water cooled spindle
    By alex wight in forum Generic Chinese Spindles
    Replies: 1
    Last Post: 21-09-2012, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules