-
11-10-2015 #1
I have been very conservative with my Denford mill and my new servos but feel that the machine moves too slow when not cutting.
My motors spin at max 3000 rpm, my leadscrews are 5mm pitch with a gearing of 1.4:1 (roughly).
Any suggested max values for Velocity / Acceleration? What is reasonable?
Thanks
-
12-10-2015 #2
So I played around. At 3000mm/min, I get PID errors. I need to do more tuning on my motors but a lack of serial port, to run the software is a problem. Need to get that fixed first.
-
12-10-2015 #3
Very hard to suggets settings Charl because every machine is different. It's just case of trial and error tweaking to suit your machine.
-
12-10-2015 #4
-
15-03-2016 #5
Hi Chaz
Which Mill ? I have a quattro mill with heidenhain controller and my friend has one with a fanuc .
Regards
Peter
-
15-03-2016 #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Denford Triac Mill
By DaveMann in forum Denford MillsReplies: 7Last Post: 12-01-2017, 10:43 AM -
FOR SALE: Emco mill 50 cnc mill like Denford Triac
By gavztheouch in forum Items For SaleReplies: 0Last Post: 18-05-2014, 10:19 AM -
stepper acceleration rate - limits?
By dsc in forum Stepper & Servo MotorsReplies: 11Last Post: 02-03-2014, 02:25 PM -
WANTED: Wanted Denford Triac CNC Mill
By angusnoble in forum Items WantedReplies: 1Last Post: 15-07-2012, 06:45 PM -
Torque Values?
By pjl83 in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 04-06-2010, 10:05 PM
Bookmarks