Greetings to all in MYCNCUK!

[Lee Roberts]

I'm fuzzy to everything that was written and went missing but I clearly 100% remember being attacked and accussed by Stoney because in post #7 I happen mentioned I build similair machine to Exel. So he assumed I was in business selling them and trying to discredit their machine to sell my own.

But the point being I did reply and has can be imagined I probably didn't mince my words.!!! . . . . So where is that post because I certainly didn't remove it.? Stoney could Edit his own post but he couldn't remove or touch mine so who did.?

Hi JazzCNC,

Like I said above, I've looked into this for you and there doesn't appear to be any moderation that has taken place on those threads, we stopped hard deleting content that needs removing from public viewing many years ago, as such the area we use as storage for such content, doesn't hold anything remotely connected to those discussions.

As I also said above, many of the posts have been edited by their authors, so it's quite possible something that was said to you was removed by the author. This could be why there is no record of moderation taking place on those posts.

With regards to your own posts being removed, if a post has content relevant to the discussion taking place then it gets left, only inappropriate comments get removed and in their place a tag that looks like this is left behind (***REMOVED*** or ***MODERATED***) along with info on what part of the forum guidelines is relevant, however like I said above, posts in that discussion have only been edited by their authors.

As a side note: When a posted is edited, regardless of the person making the edit, a copy of the original content is retained and covers an unlimited number of revisions that may have been made, so it's quite easy to compare post revisions to the original, this can be found by clicking the note added to the bottom of a post when it has been edited, it reads as something like: "Last edited by JAZZCNC; 48 Minutes Ago at 05:35 PM.", however this feature isn't available to everyone.

Truth of the matter is that thread today is fraction of what was actually said at the time.!! There were other posts on that thread that went missing or got trimmed to within an inch of there life of being unrecognisable to what I actually wrote.!! . . . . Just like has happened several times before on other threads with machine manufacturers.!!

Hum the truth of the matter is that reading through both threads, from the start to the end, the discussion flows quite naturally and how you would expect, with replies matching the order and so on of what was said previously, there is also comment made towards one of the machines Jonathan was involved with, highlighted by yourself in post 23, where you say:

Oh Dear oh Dear that's a bit pathetic mate.!! . . . After trying to serve waffle topped with Bull shit you then launch the teddy out the pram just because we didn't coo and Agh over your baby..! . . . Then you try to pick on other peoples baby's to make you look or feel better. . .Lol

So I don't know if that is some of your recollection making its way through the fuzziness your experiencing regarding this.

Just like I think it's morally wrong to Sensor threads just to please the "one" at the potential expense of the "many".!!

I share the same moral actually, as the only "spineless Admin" of that time, I can confirm that I have never had any correspondence with the members involved in those discussions, regarding those discussions...until today.

I guess I could go back through the Moderator Control Panel Logs to see if any of the moderators with delete capabilities, but no "spineless Admin" capabilities deleted posts on those threads...

...NAAAA I've got better things to be doing than proving other peoples worthiness to the "one", let alone my own.

I guess we are WAY off topic now (again), hijacking the thread and showing no etiquette what so ever. I apologise for being a hypocrite.

.Me