CNC Project - VESA Monitor Mounts using Fusion 360 Adaptive Clearing Toolpath

[komatias]

just noticed the posts that the machine left. assuming you made holes there in you 3D model, you will need to select the projected profile of the holes when selecting the geometry. The other alternative is to create a new projected profile in a sketch.

[Washout]

Thanks Komatias,

Yes I ended up creating a new surface with a sketch and used that in a further refinement to the toolpath. In fact that method also helped me with a guitar neck I am currently CAMming up in Fusion. Hopefully AutoDesk add a profile on model outline function at some point, which would be easier, but that's a good method for now.

Cheers

Chris