Quote Originally Posted by Davek0974 View Post
Well I made a Fog-Buster style unit and it does a pretty god job of fogging the shop up :(

What do we need to do to it to stop it fogging and start it splattering?

I'm using a 0.6 mig tip, maybe too small? might run a drill up it and see what happens, It also only works wit two pressure regulators - the fluid must be set higher than the air blast.
Dave how have set it up. Did you see the dxf post #6 I use one reg on the compressor and one into the container. You do need a needle valve as well.