. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 25-03-2016 #20
    Davek0974's Avatar
    Lives in Bishops stortford, United Kingdom.
    Davek0974
    Last Activity: 20-12-2024 Has been a member for 9-10 years. Has a total post count of 1,165. Received thanks 78 times, giving thanks to others 226 times.
    Different shape but essentially the same, I followed dimensions I found online, 2.2mm through-bore with 1mm fluid bore, I have a flow control on the fluid inlet, one regulator on the fluid feed and one on the air feed.

    I think the nozzle is too small at 0.6mm, I will drill out to 1mm and try that - it should reduce air velocity and increase droplet size hopefully.


    Edit


    Just been looking at the Original Fog-Buster web site an they have no nozzle at all - just a plain tube so I might just cut the nozzle off and try that.
    Last edited by Davek0974; 25-03-2016 at 08:07 PM.
    https://ddmetalproducts.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Coolant, I am not sure which one to go with.
    By suesi34e in forum Swarf & Chip Management
    Replies: 23
    Last Post: 17-10-2015, 07:13 PM
  2. My Coolant System
    By Tenson in forum Swarf & Chip Management
    Replies: 6
    Last Post: 08-04-2013, 01:59 PM
  3. Washing Machine Pump Coolant System
    By Lee Roberts in forum Electronic Project Building
    Replies: 7
    Last Post: 05-05-2012, 01:30 AM
  4. coolant
    By luke11cnc in forum Machine Discussion
    Replies: 4
    Last Post: 11-02-2012, 01:17 PM
  5. Potential project opportunity
    By irving2008 in forum General Discussion
    Replies: 2
    Last Post: 11-09-2010, 12:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules