Threaded View
-
30-10-2015 #4
Last Activity: 01-03-2016
Nema 23 motor with 8mm shaft... but there are many of theese, different types... any that is recomennded for usage with a co2 laser and drivers
Is it best to use dual shaft motor in Y axis?
Will this do:
Nema 23 motor for y axis
- Step angle: 0.9 deg
- Step per revolution: 400
- Phases: 2
- No. wires: 4
- Current: 2.1A
- Holding Torque: 0.9 N.M (127 oz*in)
- Dual Shaft: 6.35mm in diameter
- Dual Shaft length: 21mm
- Inductance: 2.5 mH
- Phase resistance: 1.8 ohms
- Detente torque: 400 gcm
- Rotor Inertia: 280 g-cm2
- Weight: 0.6KG (1.4lb)
- Length: 54mm
Last edited by Palmar; 30-10-2015 at 10:26 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Thinking about new CAD / CAM
By Tenson in forum CAD & CAM SoftwareReplies: 18Last Post: 13-09-2015, 10:18 PM -
Thinking of buying one of these little things
By Hopey in forum Marketplace DiscussionReplies: 27Last Post: 19-05-2015, 10:44 PM -
Thinking of building a 3d printer.
By Jester in forum 3D Printing MachinesReplies: 0Last Post: 24-04-2015, 08:23 PM -
Just a heads up for anybody thinking of buying HSMadvisor (FSwizard) 25% off
By m_c in forum Computer SoftwareReplies: 2Last Post: 20-04-2014, 05:19 PM -
I'm thinking of bidding on a lathe , what do you think it is worth ?
By Fivetide in forum Marketplace DiscussionReplies: 17Last Post: 22-09-2012, 10:50 PM
Bookmarks