. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-11-2015 #5
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Win7 32bit works fine with PP and Mach3.
    NOTE it must be 32bit OS for Mach3 parallel port driver to work, the program Mach3 will work fine on 64bit but the PP driver won't work so don't try.

    Also not a good idea to run CNC via KVM switch or any other device that gets between PC and CNC machine. Timings are critical with CNC and esp with the PP so these devices can and do cause problems. Best avoided so keep the CNC PC separate and ideally free from any outside sources ie: Tinternet
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. V-SLOT IN EUROPE by Rat Rig Hardware
    By ratrig in forum General Discussion
    Replies: 2
    Last Post: 12-08-2014, 01:28 PM
  2. hardware to suit Mach 3
    By PAULRO in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 13-03-2014, 10:04 PM
  3. Newbie computer hardware question
    By chris in forum Computer Hardware
    Replies: 4
    Last Post: 16-01-2014, 05:12 PM
  4. Add a computer to your network
    By Lee Roberts in forum Computer Software
    Replies: 0
    Last Post: 19-11-2008, 01:15 AM
  5. RockCliff Linear Hardware
    By geoff.sim in forum Linear & Rotary Motion
    Replies: 5
    Last Post: 05-11-2007, 01:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules