Boxford 165 HMC

[uli12us]

Thats ridiculous, they don't want, the machine is more or less indentical with the 230VMC. But, if you spoke to a boxford man, can you ask him, if the spindle is identical to the one from the 190 and 300 machine. If I know, I can buy a working spindle, then I can modify the existing spindle for BT30 with toolchanger without the trouble, the modification, don't work. From the motorside its no difference to the 190 (as long as I seen til now) Except the toolcarousel, which is a simple DC-Motor with a beltdrive. which can only run unidirectional til the next position of the stopswitch.If you want to control the spindle speed via the frontswitches, you must connect it to the input clamps of your control unit. IIRC they have 20 ports, which you can use. Its the same with the feedspeedknob, no function without connection.