Bridgeport 4th and 5th axis enabled machines

[uli12us]

I thought, you have already tested, if the enc box is compatible.

At the moment, I'll better try to get the machine running with a Mesa 7i76e that I have already here. That board have all in it what I can do with IP/M + enc + mpg + additional IO.
It have as standard 5 S/D, 1 analog out, 1Encoder in, 32 DI, 16DO and from the DI, I can use 2 ports for a Mpg and another 2ports for analog in for feed or speed rheostat. Additionally I can add 2 other boards with similiar capabilities and to all this boards each a easier Board with additional IOs

But for a further Project, it seems good to use a board, that don't have more in it, than what is needed.
Mach3 as well seems a lot easier than Lcnc but is payware.

[JAZZCNC]

I thought, you have already tested, if the enc box is compatible.

Don't know why you'd think that because I've never mentioned testing Enc mod on any controller.?

If you have Mesa card then it's a no brainer to me go this route.!