-
11-11-2015 #11
Already have and it's No go not enough spare supply they say. Daft thing is Sub station is at side of my house so would be easy to get into shop.
Doing this also comes with other hassles like tariff is higher for 3 phase and I'd be pulling mostly just from one phase costing me more to run house and rest of shop. Then I have the potential of Counsil hassling me why I have 3 phase in a domestic building.! . . . Can of worms I don't need.
I can run the motor from 240v no problem thru VFD but obviously I loose torque. i've had it running from 2.2Kw VFD already and with a little help from Jonathan I tweaked the V/Hz ratio and got it running with decent amount of torque at nominal speeds which is 33hz for de-rated setup. This still gave 1800rpm and couldn't stop the motor. But at higher speeds it dropped away to point not usable.
But with 5.5Kw Vfd then I might be able to live with the de-rated torque and still have enough for smaller cutters at higher speeds.?
That said I don't see the point of having a MONSTER MIll that performs like Fairy so would like it to be all it can be.!! . . . . If that means Aldi Beans on toast for several months then so it must be.!!
-
25-11-2015 #12
About bloody time!
-
25-11-2015 #13
-
25-11-2015 #14
You are right Dean it's not moved, what I was going to do this summer!
Now it's too cold.
Catch up with you soon.
Regards
Andy
-
26-11-2015 #15
Any updates on how the chinese servos and drives are performing?
-
27-11-2015 #16
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Monster fixed gantry router for aluminium & wood
By jonboycnc in forum DIY Router Build LogsReplies: 9Last Post: 12-01-2014, 11:26 PM -
eBay: 1500 x 1000 router any use ?
By EddyCurrent in forum Items On eBay UKReplies: 3Last Post: 24-12-2013, 12:18 PM -
Best CNC Lathe for £1000?
By Ratch in forum Marketplace DiscussionReplies: 2Last Post: 19-10-2013, 01:45 PM -
Heiz T-1000, early impressions.
By pcstru in forum Heiz CNC RoutersReplies: 27Last Post: 10-09-2012, 11:06 AM -
NEW MEMBER: New member looking to get a T-1000
By ASZUCS in forum New Member IntroductionsReplies: 1Last Post: 08-12-2010, 01:39 PM
Bookmarks