. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2017 #1
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 26-02-2025 Has been a member for 7-8 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    My router is being built with arduino electronics with 24v at moment but I would like to upgrade them to get the full potential out of my router.

    I'm a little confused on the electronics that I need I was thinking of buying 3 of these
    http://www.ebay.co.uk/itm/Used-AM882...AAAOSwe-FVAS~f

    And a dirt cheap breakout board
    http://www.ebay.co.uk/itm/5-Axis-CNC...EAAOSw7s5Xhe2P

    Would this be enough to connect to linuxcnc/mach 3

    I would run 1 driver with 2 motors (Y) and 1 driver with 1 motor (X, my gantry) at 48v with a 12amp+ power supply (My nemas are under 3amps) then the Z axis with the final driver at 24v for now.

    Or the other choice buy 3 AM882's one for each motor and then run the Z axis with a TB6600.

    My Z axis motor is only 2 amps.
    Last edited by Desertboy; 02-08-2017 at 12:04 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. which breakout board?
    By johngoodrich in forum General Electronics
    Replies: 4
    Last Post: 12-03-2017, 01:54 AM
  2. FOR SALE: 3 Axis CNC USB Motion Card Mach3 200KHz Breakout Board For Stepper/Servo Driver
    By dudz in forum Items For Sale
    Replies: 0
    Last Post: 03-01-2015, 03:40 PM
  3. eBay: uirobot stepper drivers and uniport 2 board
    By andrewuk in forum Items On eBay UK
    Replies: 0
    Last Post: 11-09-2013, 09:47 AM
  4. 2x Motors, 2x drivers. How about breakout?
    By Tenson in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 20-09-2012, 03:21 PM
  5. Stepper Driver / PSU / Breakout board Wiring ?
    By manofgresley in forum General Electronics
    Replies: 2
    Last Post: 16-08-2012, 05:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules