. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 26-11-2015 #11
    mturneruk's Avatar
    Lives in Bristol, United Kingdom.
    mturneruk
    Last Activity: 26-03-2024 Has been a member for 9-10 years. Has a total post count of 87. Received thanks 2 times, giving thanks to others 24 times.
    Thanks guys.

    Is it to small because of EMI or because of heat ?

    It's vented and i was going to chuck a couple of fans on it.

    I decided that all cables in the box would be shielded.

    Also i was going to make cut outs around the VFD and 3d print some additional vent covers to increase airflow.

    I am planning on removing the touch buttons from the VFD which comes off as a unit attached to a ribbon cable and mounting that on the outside...

    Not arguing with you, just wanted to understand the logic.

    Cheers
    Martin
    Last edited by mturneruk; 26-11-2015 at 02:20 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. 1.5Kw Chinese Spindle help
    By Hasanain in forum Generic Chinese Spindles
    Replies: 3
    Last Post: 26-05-2016, 10:38 AM
  3. WANTED: 2.2 KW Chinese Spindle
    By Chaz in forum Items Wanted
    Replies: 2
    Last Post: 17-06-2013, 10:03 AM
  4. Electronics upgrade for an existing machine.
    By Shinobiwan in forum Electronic Project Building
    Replies: 9
    Last Post: 18-03-2012, 04:01 PM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules