Electronics for New Machine + Chinese Spindle + VFD

[mturneruk]

As there are 2 power inputs into the box, the fuses are built into the 10A Chassis power input sockets. Not sure why i would need any more.
One for the VFD and one for the 48v power supply.

I am confident i can wire it ok.

Yes E'stop mounts on the front and wires into the breakout board directly. However you've made me think now about E stopping the spindle as well.

Does yours do that. Is that what you mean when you say i will need a relay ?

Obviously if i could get away with using this box i would like to as i have bought it now.

I was planning on having male / female screw on glands on the front of the box for the steppers to connect to, so the box can be separated.

Just seen this which is even tighter.
http://s26.postimg.cc/3rqeewhcp/image.jpg

However he has got partitions which i think is a good idea.
Thanks
Martin