. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-12-2015 #21
    mturneruk's Avatar
    Lives in Bristol, United Kingdom.
    mturneruk
    Last Activity: 26-03-2024 Has been a member for 9-10 years. Has a total post count of 87. Received thanks 2 times, giving thanks to others 24 times.
    It only bloody works. Managed to get the 24v psu powered up today along with the relay to prove your latching circuit Jazz. It worked and nothing blew up!
    Top shout thank you!

    I was able to power up the 48v PSU via the relay and then when pressing the Estop the relay would switch and the 48v PSU would power down. After releasing the Estop, pressing the momentary would then fire the 48V PSU back up again.

    Great idea!

    Here are some pics of my wiring. I used a 2 Amp fuse for the 24v / 5v PSU's and a 10Amp fuse for the 48V PSU. Hope that's right. Does everything look ok to you ?

    Click image for larger version.  Name: 20151211_125038.jpg  Views: 995  Size: 229.6 KB  ID: 16775Click image for larger version.  Name: 20151211_112323.jpg  Views: 1121  Size: 322.9 KB  ID: 16774Click image for larger version.  Name: 20151212_072527.jpg  Views: 926  Size: 287.9 KB  ID: 16778Click image for larger version.  Name: 20151212_072539.jpg  Views: 933  Size: 286.4 KB  ID: 16779Click image for larger version.  Name: 20151212_072519.jpg  Views: 943  Size: 373.4 KB  ID: 16777


    Here is the shelf that will carry the UC300 / KK01.

    Click image for larger version.  Name: 20151211_132113.jpg  Views: 1351  Size: 352.6 KB  ID: 16776

    Right onto the 48v Stuff now. Leaving the VFD out of the equation for now.

    Thanks again.
    Martin
    Last edited by mturneruk; 12-12-2015 at 08:54 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. 1.5Kw Chinese Spindle help
    By Hasanain in forum Generic Chinese Spindles
    Replies: 3
    Last Post: 26-05-2016, 10:38 AM
  3. WANTED: 2.2 KW Chinese Spindle
    By Chaz in forum Items Wanted
    Replies: 2
    Last Post: 17-06-2013, 10:03 AM
  4. Electronics upgrade for an existing machine.
    By Shinobiwan in forum Electronic Project Building
    Replies: 9
    Last Post: 18-03-2012, 04:01 PM
  5. WANTED: Spindle holder for 1.5kw Chinese spindle.
    By jcb121 in forum Items Wanted
    Replies: 19
    Last Post: 14-10-2011, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules