Electronics for New Machine + Chinese Spindle + VFD

[JAZZCNC]

Would a small drop of loctite be sensible on the coupling bolts ?

Not sensible more Essential. I'd also file a flat on the Ballscrews.

Regards Homing to separate switches then Yes you want them so can reset gantry square if start losing steps. If not then over time if you lose steps on the unswitched side it will never get reset so error builds over time and eventually racks the gantry and stalls one of the motors while other keeps going. Often this happens at high speeds when torque is lowest and you can imagine the results.!!