Cribbage board

**GEOFFREY** · 06-12-2015

Hi, if you can't find one let me know and I will draw one up for you and output the dxf file. G.

**swamptart** · 06-12-2015

Cheers, this is the one I'm looking for, I'm having nothing to do with the pegs lol.

Click image for larger version.

Name: 56521p.jpg
Views: 680
Size: 283.1 KB
ID: 16709

**GEOFFREY** · 06-12-2015

Hi, You do need to know what diameter is required for the pegs, unless you just want the hole centres marking. A picture of the board with approximate dimensions would also be helpful. I think the engraved lines would be fine with laser, but I do think the holes will need cutting (routing). G.

**swamptart** · 06-12-2015

Originally Posted by GEOFFREY

Hi, You do need to know what diameter is required for the pegs, unless you just want the hole centres marking. A picture of the board with approximate dimensions would also be helpful. I think the engraved lines would be fine with laser, but I do think the holes will need cutting (routing). G.

Hi, yes I think hole centre markings will be just find, I have no idea of the size or spacings im afraid, I was going to router blind holes on the cnc then jig it up on the laser to engrave it.