Thread: Cribbage board
-
06-12-2015 #1
Hi all, I'm going to attempt to make a cribbage board for a friend, I'm either going to laser it out of 10mm live edge acrylic or cnc route, the problem is I can't find any dimensions for the holes sizes spacing etc.
Can anybody help? or if you have a dxf file I would machine one for you in return :)
cheers
p
-
06-12-2015 #2
Hi, if you can't find one let me know and I will draw one up for you and output the dxf file. G.
-
06-12-2015 #3
-
06-12-2015 #4
Hi, You do need to know what diameter is required for the pegs, unless you just want the hole centres marking. A picture of the board with approximate dimensions would also be helpful. I think the engraved lines would be fine with laser, but I do think the holes will need cutting (routing). G.
-
06-12-2015 #5
-
18-12-2015 #6
Any luck with that board ?
-
18-12-2015 #7
http://www.instructables.com/id/CNC-Cribbage-Board/
half way down- dxf file
-
The Following User Says Thank You to deannos For This Useful Post:
-
19-12-2015 #8
Well done deannos. That saves drawing it up. That DXF opens perfectly, absolutely no cleaning up required.
Swamptart, please remember that it was drawn in imperial so will need scaling (x25.4) if you are working in metric. G.
-
20-12-2015 #9
What a gent! thanks so much, if you would like one made for free in acrylic pm me your details and it shall be done! again many thanks and I will inc a pic when done, have a great Christmas guys.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: pmdx 126 break out board and pmdx spindle speed board offers
By dazza in forum Items For SaleReplies: 0Last Post: 07-03-2015, 07:02 AM -
eBay: Denford Novamill SmartStep Control Board + Spindle Board
By danielbriggs in forum Items On eBay UKReplies: 0Last Post: 30-05-2013, 06:52 AM -
What board should i get ?
By Stephen-Niall in forum Motor Drivers & ControllersReplies: 4Last Post: 22-04-2012, 09:37 PM -
Breakout Board
By croy in forum Electronic Project BuildingReplies: 10Last Post: 18-08-2011, 07:50 AM -
RFQ: Kitesurf Board
By wavedinamic in forum Projects, Jobs & RequestsReplies: 12Last Post: 04-01-2010, 10:55 PM
Bookmarks