PC with ISA skot

[Clive S]

Hi Clive,

Is the slow speed necessary ? YOu can get PCI to ISA adapters and I am sure that you can run DOS somehow. Do you need 386 legacy bios features.

I am fascinated to know why you need to do this, my guess is that you have an old CNC machine that runs off a PC with this ISA card as an interface, but I am probably wrong.

Cheers,

Rob

Thanks Rob I new you would pop up on this thread.
It is not CNC related. Yes I do need the slow speed for the ISA bus this is for a friend of mine that has some dos software that runs an ISA card to program the parameters in an old type of amateur radio. He has been using a 286 but its finally packed up

[cropwell]

Hi Clive,

I have got a chap near me that gets rackmount computers from cruise ships when they refit. The last one I got from him had a 486 MB with an ISA slot. No HD. Unfortunately, I binned it. I only use the case (That was just to piss you off really )

I will have a word with my mate who runs a company called PC Doctor and see if he has owt in the museum.

Cheers,

Rob

[Clive S]

Hi Clive,

I have got a chap near me that gets rackmount computers from cruise ships when they refit. The last one I got from him had a 486 MB with an ISA slot. No HD. Unfortunately, I binned it. I only use the case (That was just to piss you off really )

I will have a word with my mate who runs a company called PC Doctor and see if he has owt in the museum.

Cheers,

Rob

If you can't take don't give it Hard drive is no prob. cheers