Toroid transformer no ouput

[routercnc]

Post #43, image #3, the yellow an black are drawn in front of AC2 and AC3, which go straight to GND..

OK, I was trying to re-use an existing circuit board and use the capacitors from it. I did not use that board in the end so ignore that picture for what you are doing it is not relevant.

Also, I'm no electronics expert and judging from your posts you aren't either. This is dangerous stuff so post pictures and diagrams before you switch on and get your electrical friend to check things first. I also wear eye protection with anything high voltage - when a capacitor lets go it is quite a bang and bits can fly off it.