Hello I just got My Harrison M300 CNC into my workshop and I have exposed all the servo motors ,encoders and drives Do any of you out there know if I can run it with Mach3via some sort of BOB .
I have a list if part numbers 1 Z axis motor is a SEM Permenant magnet DC motor Type 30E4-30 with constant stall torque of 2.1nm 80 volts pulse amps 22 Xaxis is also sem type 30H4 constant stall torque 1.1 nm 120 volts . Both z and x drives are Anilam model GA4561-7L . THE X encoder is an anilam L25G-250-ABZ-7406B AND THE Z ENCODER IS ANILAM L25G-200-ABZ-7406R-SPTO2-S. If all this makes any sort off sense at all please help . Initially I need to know can the mach3 thing be achieved then I can figure out with help how.I have now got 3 small lathes running of mach3 using steppers but this is new to me . Thanks