Thread: Coolant Pump
Threaded View
-
15-12-2015 #1
So my Denford's little pump is struggling and I would like more pressure to 'wash away' the chips.
Any thoughts on retrofitting something like this?
https://www.keengardener.co.uk/hozel...giHRoCnb7w_wcB
It seems to give good pressure, see vid.
https://www.youtube.com/watch?v=WKUoul-f2io
I would look at the 'submersible' ones but I dont want to cut the coolant tank if they do not fit into the hole of the current pump. With the pump above I can simply run the inlet into the tank.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Coolant, I am not sure which one to go with.
By suesi34e in forum Swarf & Chip ManagementReplies: 23Last Post: 17-10-2015, 07:13 PM -
My Coolant System
By Tenson in forum Swarf & Chip ManagementReplies: 6Last Post: 08-04-2013, 01:59 PM -
Washing Machine Pump Coolant System
By Lee Roberts in forum Electronic Project BuildingReplies: 7Last Post: 05-05-2012, 01:30 AM -
coolant
By luke11cnc in forum Machine DiscussionReplies: 4Last Post: 11-02-2012, 01:17 PM -
What coolant to use??
By don_jarr in forum General DiscussionReplies: 13Last Post: 05-11-2011, 03:12 PM
Bookmarks