Coolant Pump

[jamesgates1000]

I haven't but I will put all the dimensions on here when I get my tray back. It had obviously been left with coolant in it for some time before I bought it, all the water had evaporated off and the oil stripped the paint from the bottom of the tank. It is at the local bodyshop being stripped and powder coated.

[Chaz]

I haven't but I will put all the dimensions on here when I get my tray back. It had obviously been left with coolant in it for some time before I bought it, all the water had evaporated off and the oil stripped the paint from the bottom of the tank. It is at the local bodyshop being stripped and powder coated.

Ah OK. Not a biggie, will take me a few mins to measure.

[Chaz]

Ok, measured.

The HP of the coolant motor is only 0.08 HP. Lol.

Height from the mounting flange to the pump suction area - 150mm.
Hole in Coolant Tank - 90mm.
Distance between mounting hole centres - 115mm.

Do you have some dimensions of your pump?

[jamesgates1000]

Hi Chaz,
Just got my tank back so assembled it at the weekend. My dimensions are the same as yours, my pump is a sacemi IMM50A also 0.08hp.
This looks like a good replacement...

http://www.pumpsalesdirect.co.uk/spv...170mm-3ph.html

Would just need to make up a 20mm spacer to mount on.
They also sell a single phase version.

[Chaz]

Hi Chaz,
Just got my tank back so assembled it at the weekend. My dimensions are the same as yours, my pump is a sacemi IMM50A also 0.08hp.
This looks like a good replacement...

http://www.pumpsalesdirect.co.uk/spv...170mm-3ph.html

Would just need to make up a 20mm spacer to mount on.
They also sell a single phase version.

Thanks