Wiring Diagram check

**A_Camera** · 13-05-2016

A limit override should in my opinion be a push button, not a switch. Of course, I know that a switch stays on as long as you don't flip it but that is not a good solution the way I see it. If reaching to it is an issue than the position of the location is wrong. But again, this is just my opinion.

**eurikain** · 13-05-2016

I see what you mean :) That's right, it's a matter of opinion.

**nairepooc** · 08-08-2016

Hi Eurikain,

I have read through your post with great interest and it has answered many of my questions.
i was wondering if you have any photos of the control cabinet build yet?

**eurikain** · 08-08-2016

Hello nairepooc,

Thank you so much for the compliment :) I do have pictures of the build but I won't be home until tomorrow evening, but once home I can post some pictures for you :)

All the best,
Eurikain.

**eurikain** · 25-08-2016

Hello nairepooc,

First off, let me apologies for not posting earlier. I have been very busy these past few weeks, but I finally found some time to take those pictures you asked for. I hope these will be helpful to you. If you need more pictures, let me know. My camera turned on the flash for every picture, if you want I can try to take new ones without the flash, they might turn out a little brighter.

All the best, G.