Quote Originally Posted by andy_con View Post
ive just replaced the spindle bearings in my denford triac
Andy, assuming the head on the trial is similar to the star mill, could you walk a novice through the process of replacing the bearings?

I know I start with the lock washer, spin off the nut (which is used to pre-load the bearings?). But having been through this a long long time ago I'm pretty sure that after that nothing else wanted to come apart... what's the ideal way to remove spindle from bearings and bearings from head? I've seen the mechanical drawings (Denford's web site) - there's not much to this, but my random tugs some 12 months ago didn't offer any solution to getting to the bearings.