Solution to M3,4,5 spindle relay problems

[Cnc many]

That's nice, As I said I had done all that
many

[komatias]

Sorry Many, (was reading on tablet) of course you did.

I have had a play with this, created a few profiles and checked the directories. When you create a new profile, it does not instantaneously create the profile directory and copy the macros across. What I found is that most of the profile data is written when you shut down mach3 the first time round.
Seem to remember reading about how important the first shut down was when setting up a new profile. May have been in the MAch2010 documentation.

Rereading your post, it seems that you had already tried the shut down? If so, could it be a windows thing? I am asking as I have now come across the same issue on a firends machine just this morning.

[Cnc many]

Donre over several days! So not a windows or restart problem. I think the restart is all about registering the drivers ( I think!)
it could be somthing to do with the special features box top right in your picture but havnt got a clue about what's that all about
anyway it works, n iv posted this on the mach 3 forum n tweeky gave thanks for the info to help others
just working on spindle override switch and relays to switch it on when not under m3 control, and fitting an upgraded 12v supply for the flood pump and light, and a 7805 to power the Bob, im a bit short of usb slots in the computer the old one I had only delivered a max of 1.5 a not enough
interestingly, the M3-4-5 worked well at the start but then the spindle wouldn't stop. It was due to my motor control relay (not the Bob) not handling the current and the contacts fused! Even wirh my miserly 500w spindle
well u live and learn!