Hi Gotty 101,

i have been been working with Jazz for some help and thought possibly I could get u in on this as well since you seem to be further along than I am with your Am882 drives. I can make my motors move from pro tune but not my BOB.

I am am scrambling for help on this. Considering bagging the Am882 drives and going to gecko digitalis for the tech support they offer. The am882 is not offered in the states by Leadshine so they will not help at the USA office. I am hoping I didn't get bum drives from China!!!

What at settings have you used in Mach3 and the pro tune to make these damn things communicate with each other. I am not using either the alm or the enable on the 882 at the moment. I am running a PMDX 126 bob only hooking up one drive and on motor. Tried various settings in Mach motor out puts.

Possibly you would have some ideas to go along with what jazz has been giving me, and I can get this sorted out. You set up looks great by the way!

thanks

ben bouch