Hi Gotty,

Yes It is all set up that way. I have installed +5v to Dir= and Pul+. I am not using the enable or Alm but wondering if I have to run a +5 V to the enable. The drive shows no errors and is blinking green ready to go. Like I was saying its weird I can run the motor from the Pro Tune pulser but not my Mach3. I know that the box in pro tune Dir DEF has some play in this. I believe that I have it selected low. I have wrote the eepromp as well. I will try to reset the drive in Pro tune and put all the switches in the default next, and re set up the pro tune. I have tried so many different combinations its driving me nuts.

Thanks