cnc for marble

[Rufe0]

Just to reiterate on earlier 0.001 resolution was a bit optimistic. 0.01 is more realistic and would be fine.

[yasser]

i was wondering if another setting would be more appropriate

[Rufe0]

Maybe, try a few out. It depends on your steppers, drivers and how well they work together, there is probably a sweet spot. I would stay clear of the really high ones though, mircosteps aren't always as good a thing as you might think they would be for a number of reasons. Have a read about it http://www.micromo.com/microstepping...-and-realities . Obviously remember if you change your microsteps you will need to adjust the settings on your computer otherwise it will come out the wrong size.