Hi all,

I haven't got round to testing the enable pins on the drives yet as I need to order the correct connectors (http://uk.rs-online.com/web/p/non-fu...locks/1896010/ in case it's useful to others).

I have tested the enable pin on th BoB and got a slightly odd result:-

1. BoB off, PC on - 2.26v
2. BoB off, PC on, Mach 3 loaded - 1.09v
3. Mach3 loaded, BoB on, emergency stop active - 4.97v
4. Mach3 loaded, BoB on, ES reset - 195mv
5. Mach3 not running, BoB on - 4.9v
6. PC off, BoB on - 4.9v

So they all look ok to me except for number 2. From what I understand TTL levels a Low is 0v to 0.8v and a High level is 2v to 5v so a voltage of 1.09v is neither low of high which may or may not cause problems.

Anyone expirence this kind of thing before?

Thanks,
Jim