Quote Originally Posted by Lee Roberts View Post
Looking great and coming along nicely!
Cheers Lee.

If I get a chance I'll post up a more detailed set of measurements and photos of the long side parts I'm making. Having measured them on my 'surface plate' they are out by more than I thought so I've spent the last few days working out what to do, including starting them again.
They need to be accurately made because they take linear rails on both sides.

Current plan is to use the lathe to square up the parts. I've got a couple of fly cutters on order which will go in the chuck, then I need to make a raised platform which sits on the cross slide (toolpost removed) which will hold the work. I'll then feed they work by winding the crossslide past the chuck and square up the edge. I have a ground straight edge which will sit behind the other edge of the path so when it is flipped over the freshly machined edge will sit against it and mean that the second edge will be parallel to the first.
Only problem is that the cross slide had about 110mm travel and the edge is 310mm long so I will need to index it along the ground reference edge 3 times. Will this give an accurate long edge or will it give an edge with 3 facets? I will find out !

Anyone with a better idea as it won't start work on the raise platform until the weekend ?