Here we go again . . . MK4

**routercnc** · 30-06-2018

Episode 17 - time to find out if the epoxy worked and how flat it is . . .

**Nickhofen** · 30-06-2018

I am prepared this time!

Click image for larger version.

Name: 36409262_2127764940838160_5564356103082344448_n.jpg
Views: 239
Size: 87.6 KB
ID: 24490

**routercnc** · 30-06-2018

Haha ! Nice one.

**Nickhofen** · 30-06-2018

Originally Posted by routercnc

Haha ! Nice one.

The timing was amazing, I was preparing this pop corn for the kids when I saw at my email that there is an update to your thread,imagine what happened next!haha!!!

Edit:I didn't ate all the pop corn, just took the nominal taxes!

**routercnc** · 17-07-2018

Episode 18. More metrology measurements and flatness checks . . . . then a bit more building to finish the bed.

**Nr1madman** · 18-07-2018

Nice! You are a true inspiration :)

Skickat från min SM-G955F via Tapatalk

**routercnc** · 18-07-2018

Originally Posted by Nr1madman

Nice! You are a true inspiration :)

Skickat från min SM-G955F via Tapatalk

Thank you !

**diycnc** · 19-07-2018

Awesome looking build!

Is that a piece of granite worktop you are using to measure flatness from?

**routercnc** · 19-07-2018

Originally Posted by diycnc

Awesome looking build!

Is that a piece of granite worktop you are using to measure flatness from?

It’s a marble plate from our old fire surround. I checked it against other ground surfaces and it is pretty flat at least down to 0.05 mm. Also a ground block placed on it starts to wring together like gauge blocks so it must be close to flat.
Obviously nothing like a grade A plate or AA plate but it was free.

I keep looking at the proper granite blocks for metrology but they are pricey . . . One day maybe