CannonGuy - Thanks for spotting the upside down rails on the one side, it was me being lazy and mirroring everything along the mid plane!! Will probably leave it as a mirror as the feature tree on the SW assembly is already starting to get crowded.

routercnc - Thanks for confirming. I read on a few build logs that people have been keeping the temp below 60C to reduce warping, so will probably stick to this. I have a stick welder but can get a mig arranged if you guys recommend it?

Speaking of welding, do you guys recommend the epoxy leveling route on the x axis for a build this size? With the Y and Z axis do you normally not do this?