. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 29-02-2016 #13
    examorph's Avatar
    Lives in Newcastle, United Kingdom.
    examorph
    Last Activity: 22-10-2017 Has been a member for 9-10 years. Has a total post count of 58. Received thanks 2 times, giving thanks to others 36 times.
    Thanks guys, will get some adjustable feet sorted (>=M12) and also cut out some 50x50x10mm steel plate to weld to the frame legs for this. Will also make adjustments where I can to reduce the 5mm gap on the steel box section.

    njhussey - Thanks for spotting that. The clearance behind the plate is 10mm, think I could get away with using hex heads and tightening them up with a spanner?
    Attachment 17769Attachment 17768
    Last edited by examorph; 16-10-2017 at 02:57 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: First Build 5 x 12 Steel Frame CNC router
    By Scott Damman in forum DIY Router Build Logs
    Replies: 104
    Last Post: 18-01-2017, 06:36 PM
  2. BUILD LOG: New Build, Aluminium Frame Router/Mill
    By Davek0974 in forum DIY Router Build Logs
    Replies: 101
    Last Post: 31-08-2016, 05:28 PM
  3. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM
  4. BUILD LOG: First steel diy CNC router build
    By ivars211 in forum DIY Router Build Logs
    Replies: 59
    Last Post: 28-07-2014, 08:29 PM
  5. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules