Quote Originally Posted by examorph View Post
Hi all, this ones been on and off the back-burner too many times now but some progress had been made! Thanks again to Dean and Clive for helping me out with many things including the epoxy leveling and rail binding issues

So far, managed to do the leveling using West System Extra Slow cure epoxy:
Attachment 19428Attachment 19432

Got the aluminium cut:
Attachment 19429Attachment 19430

Z Axis assembled:
Attachment 19431

and some of the mechanical assembly done:
Attachment 19426Attachment 19427

Still got the X Axis ball-screws to sort out, some shimming to do on the Y-Axis screw and paint the frame. Will Hammerite be ok for painting the frame?

In the mean time, I guess its time to start looking into that witchcraft they call 'electrics'
Looking good! I used Hammerite on mine - worked well.