First time build - Steel Frame CNC Router

[Davek0974]

I didn't get any leads, never needed one either?

;)

[examorph]

Thanks guys, wouldn't have even known where to start if it wasn't for all the help on this forum!!
Please find attached updated schematics, fingers crossed 3rd time lucky?
Schematics

[JAZZCNC]

Thanks guys, wouldn't have even known where to start if it wasn't for all the help on this forum!!
Please find attached updated schematics, fingers crossed 3rd time lucky?

Looks good to go. .

[JoeHarris]

Thanks guys, wouldn't have even known where to start if it wasn't for all the help on this forum!!
Please find attached updated schematics, fingers crossed 3rd time lucky?
Attachment 19573

Looking good! I'm glad my schematic helped initially - I won't feel so bad now when I shamelessly rip off most of yours! You have definitely taken this to the next level! What are you using for connectors for your cy cable? I have struggled to find ones that allow connection to the shield...


Sent from my iPhone using Tapatalk

[examorph]

Looking good! I'm glad my schematic helped initially - I won't feel so bad now when I shamelessly rip off most of yours! You have definitely taken this to the next level! What are you using for connectors for your cy cable? I have struggled to find ones that allow connection to the shield...

Haha thanks Joe, I would have been clueless without your schematics and I cant say the same for when I shamelessly ripped off most of Deans setup!! I haven't even started looking at the cables/wires yet so got all these problems still to come!

On the topic of wiring, I found this when searching around which might come in handy for others as it sure will for me! http://www.mycncuk.com/threads/6322-...4x4-cnc-router

[JoeHarris]

Haha thanks Joe, I would have been clueless without your schematics and I cant say the same for when I shamelessly ripped off most of Deans setup!! I haven't even started looking at the cables/wires yet so got all these problems still to come!

On the topic of wiring, I found this when searching around which might come in handy for others as it sure will for me! http://www.mycncuk.com/threads/6322-...4x4-cnc-router

I'm sure many would agree that dean is an absolute legend. Thanks for the link v helpful.

By the way - these are cheap...
https://www.ebay.co.uk/itm/272210740797

[njhussey]

I'm sure many would agree that dean is an absolute legend. Thanks for the link v helpful.

By the way - these are cheap...
https://www.ebay.co.uk/itm/272210740797

These are in the UK and not too bad on price Chalon's RT18 DIN fuse holders I've found that Chalon are good value and you get good service from them, or at least I've had good service...

[Lee Roberts]

These are in the UK and not too bad on price Chalon's RT18 DIN fuse holders I've found that Chalon are good value and you get good service from them, or at least I've had good service...

Yea I can second that, Chalon are just down the road to me in Haydock and as Neil says great service all round, I selected these RT18's for an up coming CAB build too and they look to be just the job, they also have an Chalon-Components-Ltd eBay Shop, as you would expect though things cost more there, like the fuse's for these holders :).